| SAFETY DATA SHEET |  |
| PRODUCT AND COMPANY IDENTIFICATION |
| PRODUCT NAME: | SFIC Melt & Pour Soap Bases |
| PRODUCT TYPE: | Natural Coconut Container Blend |
| PRODUCT RECOMMEND USE: | Soap Bars |
| COMPANY: | SFIC Corporation |
| 4040 Pike Lane | |
| Concord, CA 94520 | |
| ISSUE DATE: | 12/12/15 |
Emergency telephone CHEMTREC 1-800-424-9300
| HAZARD IDENTIFICATION |
| PHYSICAL AND CHEMICAL HAZARDS |
| Not classified as a carcinogen |
| No evidence of harmful effects from available information |
| Human Heatlh Hazards: none |
| COMPOSITION/INFORMATION ON INGREDIENTS |
| Blend of Saponified Vegetable Oil | Proprietary 100% |
| FIRST AID MEASURES |
| Ingestion |
Give warm water to drink. If necessary seek medical attention. |
| Skin Contact |
Wash with warm water |
| Eye Contact |
Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Seek medical attention and bring along these instructions. |
| FIRE FIGHTING MEASURES |
| Extinguishing media | Extinguish with foam, carbon dioxide or dry powder. Extinguish with dry sand. Do not use water jet as extinguisher, as this will spread fire. |
|
Protective measures in fire |
Self contained breathing apparatus and full protective clothing must be worn in case of fire. |
| ACCIDENTAL RELEASE MEASURES |
| Personal Precautions | Provide adequate ventilation. Avoid inhalation of dust and vapors. In case of spills, beware of slippery floors and surfaces. |
|
Environmental Precautions |
Prevent entry into drains |
| Spill clean up methods |
Extinguish all ignition sources. Ventilate. Collect for reclamation. Collect spillage in containers, to seal securely and deliver for disposal according to local regulations. |
| HANDLING & STORAGE |
| Handling and shipping | Wear Gloves |
| EXPOSURE CONTROLS/PERSONAL PROTECTION |
|
Hand Protection |
Protective gloves should be used if there is a risk of direct contact or splash. Nitrille gloves are recommended. |
|
Eye Protection |
Wear splash-proof eye goggles to prevent any possibility of eye contact. |
|
Skin Protection |
Wash material off with warm water |
| PHYSICAL & CHEMICAL PROPERTIES |
| Appearance | Solid |
| Soluble in Water |
Yes |
| Melting Point |
120 F |
| Specific Gravity/Density |
45 lbs/cu ft |
| PH |
8.5 |
| STABILITY & REACTIVITY DATA |
| Stability | Very stable under normal temperature conditions and recommend use. |
| TOXICOLOGICAL INFORMATION |
| Inhalation |
Overheated vapor may irritate respiratory system or lungs. |
| Ingestion |
May irritate and cause stomach pain, vomiting and diarrhea. |
| Skin Contact |
There may be mild irritation at the site of contact, may be hazardous if product is hot. |
| Eye Contact |
Spray and vapor in eyes may cause irritation and redness. |
| ECOLOGICAL INFORMATION |
| Ecotoxicity | The product components are not classified as environmentally hazardous. |
| DISPOSAL CONSIDERATION |
| General Information | Do not discharge into drains, water courses or onto the ground. |
| Disposal Methods | Dispose of waste and residues in accordance with local authority requirements. |
| Waste Class | According to local and state regulations. |
| TRANSPORT INFORMATION |
| ADR/RID |
When transported under 100C this product is not regulated by ADR When transported above 100C - UN3257 ELEVATED TEMPERARELIQUIDS, N.O.S. (9), III Class: 9 (M9) UN #: 3257, Packaging group III, Hazard #:99, Label 9. |
| Technical Description | Vegetable Based Soap |
| REGULATORY INFORMATION |
| EC/GHS classification |
According to EC/GHS regulations this product is not classified as hazardous. EPA Hazard Categories (SARA 311, 312): NONE United States: The ingredients of this product are on the TSCA Inventory |
| Risk Phrases / Safety Phrases |
| OTHER INFORMATION |
| Disclaimer of Warranty | The information contained herein is based upon data availabe to us, and reflects our best professional judgement. However, no warranty of merchantability, fitness for any use, or any other warranty is expressed or implied regarding the accuracy of such data, the results to be obtained from the use thereof. or that any such does not infringe any patent. |