Shea Butter Melt & Pour Soap Base

No reviews yet Write a Review
$5.69
In Stock & Ready To Ship!
Current Stock:Only left:

Frequently Bought Together:

Total: Inc. Tax
Total: Ex. Tax

Description

 Description  Properties

Melt and Pour Soap Base with Shea butter for added buttery moisturizing properties. The Shea butter helps give the soap a smooth creamy lather.

 Type/Transparency Solid White
 Consistency Buttery, Creamy
 Usage Soap Bars
 Rec. Fragrance Load 2-3%
 Sulfate Free Yes
 Detergent Free Yes
 Prop 65 Compliant Yes
 More Information  Instructions
100% Pure Glycerin Soap Sustainable Palm Oil
 Hypo-Allergenic Cruelty Free
 Non-Comedogenic Vegan
 Biodegradable Gluten Free
 Paraben Free Food Grade Oils
 Soy Free  Non-GMO

 

Heat soap base in a microwave in microwave-compatible soap pitcher until fully liquid. Never let the soap base go above 160F. Optionally add dye once melted and stir well. Add Fragrance to soap base at 140-150F, stir thoroughly and slowly pour into compatible soap mold. Spray alcohol to remove bubbles from top surface if present. Wait 24 hours before removing soap from mold.

 DETAILED INSTRUCTION SHEET BELOW

 Ingredient List

 Documents 

Olive Oil (grade A extra virgin)

Coconut Oil

Palm Oil

Safflower Oil

Shea Butter

Purified Water

Sodium Hydroxide (saponifying agent)

Sorbitol

Propylene Glycol (made from vegetable glycerine)

Sorbitan Oleate (emulsifier)

Oat Protein

Titanium Dioxide (mineral whitener used in opaque soap)

 

Instruction Sheet for soap

Safety Data Sheet for soap

Ingredients List 

 Please be sure to perform your own tests before creating your candles in bulk as it is your responsibility to ensure the safety of the finished product by conducting all necessary tests.   

 Melt and Pour Soap Maker's Notes:

You may reheat your soap many times during crafting. but it is very important to never let you soap go above 160F. When going past 160F your soap will begin to rubberize which will likely ruin your final product. Reheating a few times to get the soap fully liquid is normal. It really helps to stir to break the clumps of the soap so that less heating is required making it much easier to stay below the 160F threshold. Reheating after applying color dye or before adding fragrance is normal. Having your soap at 140-150F before adding fragrance makes it much easier to get the soap properly mix and to keep it a lower viscosity to make pouring easier. It is important to pour slowly when pouring into your mold. The soap may bubble a lot if pouring quickly. Having a few bubbles is normal and spraying alcohol on these bubbles that accumulate on the top surface should clear them out. Spraying a few times is okay, but spraying too much can create foam. You may also melt your soap with direct from a stove or hot plate with the double boiler method, but this process is more difficult and will take longer to get your soap melted.

 Disclaimer:

It is the responsibility of the purchaser and/or the individual using the products from California Candle Supply to conduct the necessary tests to ensure the quality and safety of the product and/or finished product. In no way is California Candle Supply responsible for any adverse reactions or changes in quality due to the mixture of items/products purchased from California Candle Supply or mixed with other items/products from any other source. For this reason California Candle Supply recommends to test all products or finished products before creating items in bulk or offering products or finished products to others. It is responsibility of the purchaser and/or individual to comply with all laws when using products from California Candle Supply and to ensure safe products whether these items are being used, sold, given away or in any format where possession of an item changes ownership. It is the responsibility of the purchaser and/or individual using products from California Candle Supply to ensure all posted specifications and limits are followed to ensure further safety. In no way is California Candle Supply responsible for any damage whether to a person or property in the usages of their goods. When creating goods it is the customer's/purchaser's/user's responsibility to ensure a safe workspace, that instructions are being followed, and that items are being created in safe manner. Never leave hot wax or other craft materials unattended. Never heat any product past its flashpoint. Never let any wax exceed temperatures of 220F and/or temperatures in which damage can occur to persons or property. California Candle supply is not responsible for any harm or damage to persons or property in the creation of making goods with its products. In regards to using products: never burn or use your candles or products in a draft, never leave a burning candle or product unattended, never place a candle or product on uneven or bare surface, do not burn candles or use products next other items including but not limited to furniture ,drapes ,paper, or anything that could catch fire or become damaged. 

 Description

Melt and Pour Soap Base with Shea butter for added buttery moisturizing properties. The Shea butter helps give the soap a smooth creamy lather.

 Properties

 Type/Transparency Solid White
 Consistency Buttery, Creamy
 Usage Soap Bars
 Rec. Fragrance Load 2-3%
 Sulfate Free Yes
 Detergent Free Yes
 Prop 65 Compliant Yes
 More Information
100% Pure Glycerin Soap Sustainable Palm Oil
 Hypo-Allergenic Cruelty Free
 Non-Comedogenic Vegan
 Biodegradable Gluten Free
 Paraben Free Food Grade Oils
 Soy Free  Non-GMO

 Instructions

Heat soap base in a microwave in microwave-compatible soap pitcher until fully liquid. Never let the soap base go above 160F. Optionally add dye once melted and stir well. Add Fragrance to soap base at 140-150F, stir thoroughly and slowly pour into compatible soap mold. Spray alcohol to remove bubbles from top surface if present. Wait 24 hours before removing soap from mold.

 DETAILED INSTRUCTION SHEET BELOW

 Ingredient List

Olive Oil (grade A extra virgin)

Coconut Oil

Palm Oil

Safflower Oil

Shea Butter

Purified Water

Sodium Hydroxide (saponifying agent)

Sorbitol

Propylene Glycol (made from vegetable glycerine)

Sorbitan Oleate (emulsifier)

Oat Protein

Titanium Dioxide (mineral whitener used in opaque soap)

Documents

Instruction sheet for soap 

Safety Data Sheet for soap

Ingredient list

 Please be sure to perform your own tests before creating your candles in bulk as it is your responsibility to ensure the safety of the finished product by conducting all necessary tests.

 Melt and Pour Soap Maker's Notes:

You may reheat your soap many times during crafting. but it is very important to never let you soap go above 160F. When going past 160F your soap will begin to rubberize which will likely ruin your final product. Reheating a few times to get the soap fully liquid is normal. It really helps to stir to break the clumps of the soap so that less heating is required making it much easier to stay below the 160F threshold. Reheating after applying color dye or before adding fragrance is normal. Having your soap at 140-150F before adding fragrance makes it much easier to get the soap properly mix and to keep it a lower viscosity to make pouring easier. It is important to pour slowly when pouring into your mold. The soap may bubble a lot if pouring quickly. Having a few bubbles is normal and spraying alcohol on these bubbles that accumulate on the top surface should clear them out. Spraying a few times is okay, but spraying too much can create foam. You may also melt your soap with direct from a stove or hot plate with the double boiler method, but this process is more difficult and will take longer to get your soap melted.

 Disclaimer:

It is the responsibility of the purchaser and/or the individual using the products from California Candle Supply to conduct the necessary tests to ensure the quality and safety of the product and/or finished product. In no way is California Candle Supply responsible for any adverse reactions or changes in quality due to the mixture of items/products purchased from California Candle Supply or mixed with other items/products from any other source. For this reason California Candle Supply recommends to test all products or finished products before creating items in bulk or offering products or finished products to others. It is responsibility of the purchaser and/or individual to comply with all laws when using products from California Candle Supply and to ensure safe products whether these items are being used, sold, given away or in any format where possession of an item changes ownership. It is the responsibility of the purchaser and/or individual using products from California Candle Supply to ensure all posted specifications and limits are followed to ensure further safety. In no way is California Candle Supply responsible for any damage whether to a person or property in the usages of their goods. When creating goods it is the customer's/purchaser's/user's responsibility to ensure a safe workspace, that instructions are being followed, and that items are being created in safe manner. Never leave hot wax or other craft materials unattended. Never heat any product past its flashpoint. Never let any wax exceed temperatures of 220F and/or temperatures in which damage can occur to persons or property. California Candle supply is not responsible for any harm or damage to persons or property in the creation of making goods with its products. In regards to using products: never burn or use your candles or products in a draft, never leave a burning candle or product unattended, never place a candle or product on uneven or bare surface, do not burn candles or use products next other items including but not limited to furniture ,drapes ,paper, or anything that could catch fire or become damaged. 

 

 

 

 

 

Product Reviews

No reviews yet Write a Review